二甲苯 · 英文 MSDS
Safety Data Sheet
SECTION 1: Identification of the substance/mixture and of the company/undertaking
>Product identifier
- Product name: Xylene
- CBnumber: CB0130912
- CAS: 1330-20-7
- EINECS Number: 215-535-7
- Synonyms: Xylene,Xylenes
>Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses: For R&D use only. Not for medicinal, household or other use.
- Uses advised against: none
>Company Identification
- Company: Linyi Tuohui New Materials Co., Ltd.
- Address: Room A6159, 6F, Building 1, Linyi Software Park, No.6 Yihe Road, Zhimadun Subdistrict, Yishui New Area, Linyi City, Shandong Province, China
- Telephone: +86 176 6460 5089 (Manager Niu) / +86 130 4664 1786 (Manager Li)
- Email: nathan@tuohui-chem.com
- WhatsApp: +86 176 6460 5089
- Emergency telephone: +86 176 6460 5089
SECTION 2: Hazards identification
>GHS Label elements, including precautionary statements
- Symbol(GHS)


- Signal wordDanger
Precautionary statements
Hazard statements
SECTION 3: Composition/information on ingredients
>Substance
- Product name: Xylene
- Synonyms: Xylene,Xylenes
- CAS: 1330-20-7
- EC number: 215-535-7
- MF: C8H10
- MW: 106.17
SECTION 4: First aid measures
>Description of first aid measures
General advice
If inhaled
In case of skin contact
In case of eye contact
If swallowed
>Most important symptoms and effects, both acute and delayed
>Indication of any immediate medical attention and special treatment needed
SECTION 5: Firefighting measures
>Extinguishing media
Suitable extinguishing media
Unsuitable extinguishing media
>Special hazards arising from the substance or mixture
Carbon oxides Combustible.
Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air at elevated temperatures.
Development of hazardous combustion gases or vapours possible in the event of fire.
>Advice for firefighters
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
>Further information
Remove container from danger zone and cool with water. Prevent fire extinguishing water from contaminating surface water or the ground water system.
>NFPA 704
SECTION 6: Accidental release measures
>Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Keep away from heat and sources of ignition.
Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8.
>Environmental precautions
Do not let product enter drains. Risk of explosion.
>Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up carefully with liquid-absorbent material (e.g.
Chemizorb). Dispose of properly. Clean up affected area.
>Reference to other sections
For disposal see section 13.
SECTION 7: Handling and storage
>Precautions for safe handling
> Advice on safe handling
Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols.
> Advice on protection against fire and explosion
Keep away from open flames, hot surfaces and sources of ignition.Take precautionary measures against static discharge.
> Hygiene measures
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
For precautions see section 2.2.
>Conditions for safe storage, including any incompatibilities
> Storage conditions
Keep container tightly closed in a dry and well-ventilated place. Keep away from heat and sources of ignition.
>Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
SECTION 8: Exposure controls/personal protection
>control parameter
Hazard composition and occupational exposure limits
>Exposure controls
Personal protective equipment
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Splash contact Material: Viton
Minimum layer thickness: 0,7 mm Break through time: 480 min
Material tested:Vitoject (KCL 890 / Aldrich Z677698, Size M)
This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Full contact Material: Viton
Minimum layer thickness: 0,7 mm Break through time: 480 min
Material tested:Vitoject (KCL 890 / Aldrich Z677698, Size M)
Flame retardant antistatic protective clothing.
Recommended Filter type: Filter A (acc. to DIN 3181) for vapours of organic compounds
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer.
These measures have to be properly documented.
Do not let product enter drains. Risk of explosion.
SECTION 9: Physical and chemical properties
>Information on basic physicochemical properties
- Appearancecolorless clear, liquid
- OdourNo data available
- Odour ThresholdNo data available
- pHNo data available
- Melting point/freezing pointMelting point/range: 171 - 172 °C
- Initial boiling point and boiling range 137 - 140 °C - lit.
- Flash point25 °C - closed cup
- Evaporation rateNo data available
- Flammability (solid, gas)No data available
- Upper/lower flammability or explosive limits Upper explosion limit: 7,0 %(V) Lower explosion limit: 1,1 %(V)
- Vapour pressure 23,99 hPa at 37,70 °C
- Vapour density 3,67 - (Air = 1.0)
- Relative densityNo data available
- Water solubility0,1705 g/l at 25 °C - partly soluble
- Partition coefficient: n-octanol/waterlog Pow: 3,12 at 20 °C - Bioaccumulation is not expected.
- Autoignition temperature463 °C at 1.013 hPa
- Decomposition temperature No data available
- ViscosityViscosity, kinematic: No data available Viscosity, dynamic: 0,76 mPa.s at 25,00 °C
- Explosive propertiesNo data available
- Oxidizing propertiesNo data available
>Other safety information
Relative vapor density
3,67 - (Air = 1.0)
SECTION 10: Stability and reactivity
>Reactivity
Vapor/air-mixtures are explosive at intense warming.
>Chemical stability
The product is chemically stable under standard ambient conditions (room temperature) .
>Possibility of hazardous reactions
Exothermic reaction with:
Strong oxidizing agents Acids
sulfur
conc. sulfuric acid
Risk of explosion/exothermic reaction with:
Nitric acid
uranium hexafluoride
>Conditions to avoid
Heating.
>Incompatible materials
No data available
>Hazardous decomposition products
In the event of fire: see section 5
SECTION 11: Toxicological information
>Information on toxicological effects
Acute toxicity
LD50 Oral - Rat - male - 3.523 mg/kg
(EC Directive 92/69/EEC B.1 Acute Toxicity (Oral)) Remarks: (ECHA)
Acute toxicity estimate Inhalation - 4 h - 11 mg/l (Calculation method)
LC50 Inhalation - Rat - male - 4 h - 29,09 mg/l (Regulation (EC) No. 440/2008, Annex, B.2) Remarks: (Regulation (EC) No 1272/2008, Annex VI) Acute toxicity estimate Dermal - 1.101 mg/kg (Calculation method)
LD50 Dermal - Rabbit - > 1.700 mg/kg Remarks: (RTECS)
Skin corrosion/irritation
Result: Moderate skin irritation - 24 h Remarks: (IUCLID)
Drying-out effect resulting in rough and chapped skin. After long-term exposure to the chemical: Dermatitis
Serious eye damage/eye irritation
Result: Causes serious eye irritation. - 24 h Remarks: (RTECS)
Respiratory or skin sensitization
Result: negative
(OECD Test Guideline 429)
Germ cell mutagenicity
Metabolic activation: with and without metabolic activation Method: Regulation (EC) No. 440/2008, Annex, B.10 Result: negative
Remarks: (National Toxicology Program) Test Type: Ames test
Test system: Salmonella typhimurium
Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 471
Result: negative
Test Type: sister chromatid exchange assay Test system: Chinese hamster ovary cells
Metabolic activation: with and without metabolic activation Method: Regulation (EC) No. 440/2008, Annex, B.19 Result: negative
Test Type: dominant lethal test Species: Mouse
Method: OECD Test Guideline 478 Result: negative
Carcinogenicity
Reproductive toxicity
Specific target organ toxicity - single exposure
Specific target organ toxicity - repeated exposure
Aspiration hazard
Toxicity
SECTION 12: Ecological information
>Toxicity
No data available
- 96 h
(OECD Test Guideline 203)
(Xylene)
>Persistence and degradability
No data available
>Bioaccumulative potential
>Mobility in soil
>Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
>Toxics Screening Level
>Other adverse effects
No data available
SECTION 13: Disposal considerations
>Waste treatment methods
SECTION 14: Transport information
>UN number
SECTION 15: Regulatory information
>Safety, health and environmental regulations/legislation specific for the substance or mixture
Regulations on the Safety Management of Hazardous Chemicals
Measures for Environmental Management of New Chemical Substances
SECTION 16: Other information
>Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
>References
【1】CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
【2】ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
【3】ECHA - European Chemicals Agency, website: https://echa.europa.eu/
【4】eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
【5】ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
【6】Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
【7】HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
【8】IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
【9】IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
【10】Sigma-Aldrich, website: https://www.sigmaaldrich.com/
本页为本站内置的 SDS 本地副本,可在线浏览;如需 PDF 文档,请点击右上角“下载 PDF”按钮。
拓辉新材料