拓辉新材料甲醛 · 英文 MSDS
Safety Data Sheet
Prepared in accordance with GB/T 16483, GB/T 17519
SECTION 1: Identification of the substance/mixture and of the company/undertaking
>Product identifier
- Product name: Formaldehyde
- CBnumber: CB4853677
- CAS: 50-00-0
- EINECS Number: 200-001-8
- Synonyms: Formaldehyde,HCHO
>Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses: For R&D use only. Not for medicinal, household or other use.
- Uses advised against: none
>Company Identification
- Company: Linyi Tuohui New Materials Co., Ltd.
- Address: Room A6159, 6F, Building 1, Linyi Software Park, No.6 Yihe Road, Zhimadun Subdistrict, Yishui New Area, Linyi City, Shandong Province, China
- Telephone: +86 176 6460 5089 (Manager Niu) / +86 130 4664 1786 (Manager Li)
- Email: nathan@tuohui-chem.com
- WhatsApp: +86 176 6460 5089
- Emergency telephone: +86 176 6460 5089
SECTION 2: Hazards identification
>GHS Label elements, including precautionary statements
- Symbol(GHS)
- Signal wordDanger
Precautionary statements
P202 Do not handle until all safety precautions have been read and understood.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing.
Hazard statements
H314 Causes severe skin burns and eye damage
H317 May cause an allergic skin reaction
H330 Fatal if inhaled
H335 May cause respiratory irritation
H341 Suspected of causing genetic defects
H350 May cause cancer
H370 Causes damage to organs
SECTION 3: Composition/information on ingredients
>Substance
- Product name: Formaldehyde
- Synonyms: Formaldehyde,HCHO
- CAS: 50-00-0
- EC number: 200-001-8
- MF: CH2O
- MW: 30.03
SECTION 4: First aid measures
>General advice
First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance.
>If inhaled
After inhalation: fresh air. Immediately call in physician. If breathing stops: immediately apply artificial respiration, if necessary also oxygen.
>In case of skin contact
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.
>In case of eye contact
After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.
>If swallowed
After swallowing: fresh air. Make victim drink ethanol (e.g. 1 drinking glass of a 40% alcoholic beverage). Call a doctor immediately (mention methanol ingestion). Only in exceptional cases, if no medical care is available within one hour, induce vomiting (only in fully conscious persons) and make victim drink ethanol again (approx. 0.3 ml of a 40% alcoholic beverage/kg body weight/hour). Do not attempt to neutralise.
>Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2) and/or in section 11
>Protection of first-aiders
For personal protection see section 8.
>Notes to physician
No data available
SECTION 5: Firefighting measures
>Suitable extinguishing media
Water Foam Carbon dioxide (CO2) Dry powder
>Unsuitable extinguishing media
For this substance/mixture no limitations of extinguishing agents are given.
>Specific hazards during fire fighting
Mixture with combustible ingredients. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air at elevated temperatures. Development of hazardous combustion gases or vapours possible in the event of fire.
>Hazardous combustion products
Carbon oxides
>Specific extinguishing methods
Remove container from danger zone and cool with water. Prevent fire extinguishing water from contaminating surface water or the ground water system.
>Special protective equipment for fire-fighters
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
>NFPA 704
3
4
0
SECTION 6: Accidental release measures
>Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Keep away from heat and sources of ignition. Evacuate the danger area, observe emergency procedures, consult an expert. Advice for emergency responders: For personal protection see section 8.
>Environmental precautions
Do not let product enter drains. Risk of explosion.
>Methods and materials for containment and cleaning up
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up carefully with liquid-absorbent material . Dispose of properly. Clean up affected area.
>Prevention of secondary hazards
Render harmless: Treatment with execess sodium hydrogen sulfite solution.
SECTION 7: Handling and storage
>Handling
Advice on protection against fire and explosion
Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharge.
Advice on safe handling
Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols.
Avoidance of contact
Strong oxidizing agents Aniline Phenol Isocyanates Acid anhydrides Strong acids Strong bases Amines Peroxides Acid chlorides Alkali metals Reducing agents
>Storage
Further information on storage conditions
Keep container tightly closed in a dry and wellventilated place. Keep away from heat and sources of ignition. Keep locked up or in an area accessible only to qualified or authorized persons.
Storage class
3, Flammable liquids
Recommended storage temperature
Recommended storage temperature see product label.
Packaging material
Suitable material: Amber Glass Bottle/Jar, Poly-lined Steel Drum
SECTION 8: Exposure controls/personal protection
>Ingredients with workplace control parameters
Biological occupational exposure limits
>Engineering measures
No data available
>Personal protective equipment
Respiratory protection
required when vapours/aerosols are generated.
Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.
Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.
Recommended Filter type
Filter type ABEK
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Tightly fitting safety goggles
Tightly fitting safety goggles
Skin and body protection
Flame retardant antistatic protective clothing.
Hand protection
Material
Nitrile rubber
Break through time
480 min
Glove thickness
0.4 mm
Protective index
Full contact
Manufacturer
Camatril (KCL 730 / Aldrich Z677442, Size M)
Material
Break through time
60 min
Glove thickness
0.2 mm
Protective index
Splash contact
Manufacturer
P (KCL 743 / Aldrich Z677388, Size M)
Manufacturer
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374
Remarks
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Hygiene measures
Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.
SECTION 9: Physical and chemical properties
>Information on basic physicochemical properties
- Solubilitywater: soluble
- Physical stateSolution
- Dielectric constant23.0（Ambient）
- Henry's Law Constant2.08(x 10-7 atmm3/mol) at 25 °C (flow-type generation system, spectrophometry, Kanda et al., 2005)
- Appearanceliquid, clear
- Colorcolorless
- Odorpungent
- Odor ThresholdNo data available
- pH2.8 - 4.0
- Melting point/ rangeNo data available
- Boiling point/boiling range100 °C
- Flash point56.11 °C
Method: closed cup - Evaporation rate1
- Flammability (solid, gas)No data available
- Flammability (liquids)No data available
- Burning rateNo data available
- Upper explosion limit / Upper flammability limit70 %(V)
- Lower explosion limit / Lower flammability limit7 %(V)
- Vapor pressure53 hPa (39 °C)
- Relative vapor density1.04
- Relative density1.09 g/mL at 25 °C(lit.)
- Density1.09 g/mL (25 °C)
- Water solubilitycompletely soluble soluble (20 °C)
- Partition coefficient: n-octanol/waterlog Pow: 0.35
- Autoignition temperature420 °C
- Decomposition temperatureNo data available
- Viscosity, dynamicNo data available
- Viscosity, kinematicNo data available
- Flow timeNo data available
- Explosive propertiesNot classified as explosive.
- Oxidizing propertiesnone
- Molecular weight30.03 g/mol
- Particle characteristics Particle sizeNo data available
SECTION 10: Stability and reactivity
>Reactivity
Vapor/air-mixtures are explosive at intense warming.
>Chemical stability
The product is chemically stable under standard ambient conditions (room temperature) .
>Contains the following stabilizer(s):
Methanol (>=9 - <=15 %)
>Possibility of hazardous reactions
No data available
>Conditions to avoid
Heating.
>Incompatible materials
Strong oxidizing agents Aniline Phenol Isocyanates Acid anhydrides Strong acids Strong bases Amines Peroxides Acid chlorides Alkali metals Reducing agents
>Hazardous decomposition products
In the event of fire: see section 5
SECTION 11: Toxicological information
>11.1 Information on toxicological effects
Mixture Acute toxicity
Oral: No data available
Acute toxicity estimate Oral - 200.06 mg/kg (Calculation method)
Symptoms: If ingested, severe burns of the mouth and throat, as well as a danger of perforation of the esophagus and the stomach.
Acute toxicity estimate Inhalation - 4 h - 1.36 mg/l - vapor(Calculation method)
Symptoms: mucosal irritations, Cough, Shortness of breath, Possible damages:, damage of respiratory tract
Acute toxicity estimate Dermal - 556.75 mg/kg (Calculation method)
Acute toxicity estimate Oral - 200.06 mg/kg (Calculation method)
Symptoms: If ingested, severe burns of the mouth and throat, as well as a danger of perforation of the esophagus and the stomach.
Acute toxicity estimate Inhalation - 4 h - 1.36 mg/l - vapor(Calculation method)
Symptoms: mucosal irritations, Cough, Shortness of breath, Possible damages:, damage of respiratory tract
Acute toxicity estimate Dermal - 556.75 mg/kg (Calculation method)
Skin corrosion/irritation
Remarks: Mixture causes burns.
Serious eye damage/eye irritation
Remarks: Mixture causes serious eye damage.
Risk of blindness!
Risk of blindness!
Respiratory or skin sensitization
May cause sensitization by skin contact.
Mixture may cause an allergic skin reaction.
Mixture may cause an allergic skin reaction.
Germ cell mutagenicity
Evidence of genetic defects.
Carcinogenicity
Possible carcinogen.
Reproductive toxicity
Classified based on available data. For more details, see section 2
Specific target organ toxicity - single exposure
Mixture causes damage to organs. - Eyes, Central nervous system
Mixture may cause respiratory irritation.
Mixture may cause respiratory irritation.
Specific target organ toxicity - repeated exposure
Aspiration hazard
>11.2 Additional Information
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated., bronchospasm, Symptoms of exposure may include burning sensation, coughing, wheezing, laryngitis, shortness of breath, headache, nausea, and vomiting., Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin., chest pain, Diffi- culty in breathing, May cause convulsions.
Other dangerous properties can not be excluded.
This substance should be handled with particular care.
Handle in accordance with good industrial hygiene and safety practice.
Other dangerous properties can not be excluded.
This substance should be handled with particular care.
Handle in accordance with good industrial hygiene and safety practice.
Components formaldehyde
Acute toxicity
LD50 Oral - Rat - 100 mg/kg
Remarks: (Lit.)
Acute toxicity estimate Inhalation - 4 h - 0.51 mg/l - vapor (Expert judgment)
Remarks: Classified according to Regulation (EU) 1272/2008, Annex VI (Table 3.1/3.2)
LD50 Dermal - Rabbit - 270 mg/kg
Remarks: (RTECS)
Remarks: (Lit.)
Acute toxicity estimate Inhalation - 4 h - 0.51 mg/l - vapor (Expert judgment)
Remarks: Classified according to Regulation (EU) 1272/2008, Annex VI (Table 3.1/3.2)
LD50 Dermal - Rabbit - 270 mg/kg
Remarks: (RTECS)
Skin corrosion/irritation
Skin - Rabbit
Result: Causes burns. - 20 h (OECD Test Guideline 404)
Result: Causes burns. - 20 h (OECD Test Guideline 404)
Serious eye damage/eye irritation
Remarks: Causes serious eye damage.
Respiratory or skin sensitization
Maximization Test - Guinea pig
Result: positive (OECD Test Guideline 406)
Result: positive (OECD Test Guideline 406)
Germ cell mutagenicity
Suspected of causing genetic defects.
Carcinogenicity
Presumed to have carcinogenic potential for humans
Reproductive toxicity
Specific target organ toxicity - single exposure
May cause respiratory irritation.
Specific target organ toxicity - repeated exposure Aspiration hazard
Methanol
Acute toxicity estimate Oral - 100.1 mg/kg (Expert judgment)
Remarks: Classified according to Regulation (EU) 1272/2008, Annex VI (Table 3.1/3.2)
Symptoms: Nausea, Vomiting
Acute toxicity estimate Inhalation - 4 h - 3.1 mg/l - vapor (Expert judgment)
Remarks: Classified according to Regulation (EU) 1272/2008, Annex VI (Table 3.1/3.2)
Symptoms: Irritation symptoms in the respiratory tract.
Acute toxicity estimate Dermal - 300.1 mg/kg (Expert judgment)
Remarks: Classified according to Regulation (EU) 1272/2008, Annex VI (Table 3.1/3.2)
Remarks: Classified according to Regulation (EU) 1272/2008, Annex VI (Table 3.1/3.2)
Symptoms: Nausea, Vomiting
Acute toxicity estimate Inhalation - 4 h - 3.1 mg/l - vapor (Expert judgment)
Remarks: Classified according to Regulation (EU) 1272/2008, Annex VI (Table 3.1/3.2)
Symptoms: Irritation symptoms in the respiratory tract.
Acute toxicity estimate Dermal - 300.1 mg/kg (Expert judgment)
Remarks: Classified according to Regulation (EU) 1272/2008, Annex VI (Table 3.1/3.2)
Skin - Rabbit
Result: No skin irritation
Remarks: (ECHA)
Remarks: Drying-out effect resulting in rough and chapped skin.
Result: No skin irritation
Remarks: (ECHA)
Remarks: Drying-out effect resulting in rough and chapped skin.
Eyes - Rabbit
Result: No eye irritation
Remarks: (ECHA)
Result: No eye irritation
Remarks: (ECHA)
Sensitisation test: - Guinea pig
Result: negative (OECD Test Guideline 406)
Result: negative (OECD Test Guideline 406)
Based on available data the classification criteria are not met.
Test Type: Ames test
Test system: Salmonella typhimurium
Result: negative
Test Type: In vitro mammalian cell gene mutation test
Test system: Chinese hamster lung cells
Result: negative
Method: OECD Test Guideline 474
Species: Mouse - male and female - Bone marrow
Result: negative
Test Type: Ames test
Test system: Salmonella typhimurium
Result: negative
Test Type: In vitro mammalian cell gene mutation test
Test system: Chinese hamster lung cells
Result: negative
Method: OECD Test Guideline 474
Species: Mouse - male and female - Bone marrow
Result: negative
Did not show carcinogenic effects in animal experiments.
Based on available data the classification criteria are not met.
Causes damage to organs. - Eyes, Central nervous system
Remarks: Classified according to Regulation (EU) 1272/2008, Annex VI (Table 3.1/3.2)
Acute oral toxicity - Nausea, Vomiting
Acute inhalation toxicity - Irritation symptoms in the respiratory tract.
Remarks: Classified according to Regulation (EU) 1272/2008, Annex VI (Table 3.1/3.2)
Acute oral toxicity - Nausea, Vomiting
Acute inhalation toxicity - Irritation symptoms in the respiratory tract.
Specific target organ toxicity - repeated exposure
Aspiration hazard
Classified based on available data. For more details, see section 2
SECTION 12: Ecological information
>Ecotoxicity
>Components:
>formaldehyde:
Toxicity to fish
LC50 (Morone saxatilis): 6.7 mg/l End point: mortality Exposure time: 96 h Test Type: static test Remarks: (ECHA)
Toxicity to daphnia and other aquatic invertebrates
EC50 (Daphnia pulex (Water flea)): 5.8 mg/l End point: Immobilization Exposure time: 48 h Test Type: static test Method: OECD Test Guideline 202
Toxicity to algae/aquatic plants
ErC50 (Desmodesmus subspicatus (green algae)): 4.89 mg/l Exposure time: 72 h Test Type: static test Method: OECD Test Guideline 201
Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity)
NOEC (Daphnia magna (Water flea)): >= 6.4 mg/l End point: reproduction rate Exposure time: 21 d Test Type: semi-static test Analytical monitoring: yes Method: OECD Test Guideline 211 GLP: yes
Toxicity to microorganisms
EC50 (activated sludge): 19 mg/l Exposure time: 3 h Test Type: static test Method: OECD Test Guideline 209
>Methanol:
Toxicity to fish
LC50 (Lepomis macrochirus (Bluegill)): 15,400.0 mg/l End point: mortality Exposure time: 96 h Test Type: flow-through test Analytical monitoring: yes Method: US-EPA
Toxicity to daphnia and other aquatic invertebrates
EC50 (Daphnia magna (Water flea)): 18,260 mg/l End point: Immobilization Exposure time: 96 h Test Type: semi-static test Method: OECD Test Guideline 202
Toxicity to algae/aquatic plants
ErC50 (Pseudokirchneriella subcapitata (green algae)): ca. 22,000.0 mg/l Exposure time: 96 h Test Type: static test Method: OECD Test Guideline 201
Toxicity to fish (Chronic toxicity)
NOEC (Oryzias latipes (Orange-red killifish)): 7,900 mg/l Exposure time: 200 h Remarks: (External MSDS)
Toxicity to microorganisms
IC50 (activated sludge): > 1,000 mg/l Exposure time: 3 h Test Type: static test Analytical monitoring: yes Method: OECD Test Guideline 209
>Persistence and degradability
>Components:
>formaldehyde:
Biodegradability
aerobic Inoculum: Sewage sludge Concentration: 10 mg/l Dissolved organic carbon (DOC) Result: Readily biodegradable. Biodegradation: 99 % Exposure time: 28 d Method: OECD Test Guideline 301A GLP: yes
BOD/COD
BOD/COD: 0.74 %
>Methanol:
Biodegradability
Result: Readily biodegradable. Biodegradation: 99 % Exposure time: 30 d Method: OECD Test Guideline 301D
Biochemical Oxygen Demand (BOD)
600 - 1,120 mg/g Incubation time: 5 d Remarks: (IUCLID)
Chemical Oxygen Demand (COD)
1,420 mg/g Remarks: (IUCLID)
ThOD
1,500 mg/g Remarks: (Lit.)
BOD/ThOD
76 % Remarks: Closed Bottle test (IUCLID)
Stability in water
Hydrolysis: 83 - 91 % at 19 °C(72 h) Remarks: Hydrolyzes on contact with water. Hydrolyzes readily. Degradation half life: 2.2 yr Remarks: reaction with hydroxyl radicals (IUCLID)
Photodegradation
Degradation (direct photolysis): 50 % Degradation half life: 17.2 d
>Bioaccumulative potential
>Components:
>formaldehyde:
Partition coefficient: noctanol/water
log Pow: 0.021 Remarks: (Lit.) Bioaccumulation is not expected.
>Methanol:
Bioaccumulation
Species: Cyprinus carpio (Carp) Bioconcentration factor (BCF): 1.0 Exposure time: 72 d Temperature: 20 °C Concentration: 5 mg/l
Partition coefficient: noctanol/water
log Pow: -0.77 (25 °C) Method: (experimental) Remarks: (HSDB) Bioaccumulation is not expected.
>Mobility in soil
>Components:
>Methanol:
Stability in soil
Remarks: Will not adsorb on soil.
>Other adverse effects
>Components:
>formaldehyde:
Results of PBT and vPvB assessment
Substance does not meet the criteria for PBT or vPvB according to Regulation (EC) No 1907/2006, Annex XIII.
>Methanol:
Results of PBT and vPvB assessment
Substance is not persistent, bioaccumulative, and toxic (PBT).
Additional ecological information
Avoid release to the environment.
SECTION 13: Disposal considerations
>Disposal methods
Waste from residues
Offer surplus and non-recyclable solutions to a licensed disposal company.
SECTION 14: Transport information
>International Regulations
>IATA-DGR
UN/ID No. : UN 1198
Proper shipping name : Formaldehyde solution, flammable
Class : 3
Subsidiary risk : 8
Packing group : III
Labels : Class 3 - Flammable liquids, Class 8 - Corrosive substances
Packing instruction (cargo aircraft) : 365
Packing instruction (passenger aircraft) : 354
Proper shipping name : Formaldehyde solution, flammable
Class : 3
Subsidiary risk : 8
Packing group : III
Labels : Class 3 - Flammable liquids, Class 8 - Corrosive substances
Packing instruction (cargo aircraft) : 365
Packing instruction (passenger aircraft) : 354
>IMDG-Code
UN number : UN 1198
Proper shipping name : FORMALDEHYDE SOLUTION, FLAMMABLE
Class : 3
Subsidiary risk : 8
Packing group : III
Labels : 3 (8)
EmS Code : F-E, S-C
Marine pollutant : no
Proper shipping name : FORMALDEHYDE SOLUTION, FLAMMABLE
Class : 3
Subsidiary risk : 8
Packing group : III
Labels : 3 (8)
EmS Code : F-E, S-C
Marine pollutant : no
>Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable for product as supplied.
National regulation GB 6944/12268
UN number : UN 1198
Proper shipping name : FORMALDEHYDE SOLUTION, FLAMMABLE
Class : 3
Subsidiary risk : 8
Packing group : III
Labels : 3 (8)
National regulation GB 6944/12268
UN number : UN 1198
Proper shipping name : FORMALDEHYDE SOLUTION, FLAMMABLE
Class : 3
Subsidiary risk : 8
Packing group : III
Labels : 3 (8)
>Special precautions for user
The transport classification(s) provided herein are for informational purposes only, and solely based upon the properties of the unpackaged material as it is described within this Safety Data Sheet. Transportation classifications may vary by mode of transportation, package sizes, and variations in regional or country regulations.
SECTION 15: Regulatory information
Catalogue of Hazardous Chemicals : This product is not listed in the catalogue of hazardous chemicals, but it meets the definition of hazardous chemicals and its principles of determination.
>National regulatory information
>Law on the Prevention and Control of Occupational Diseases
>Regulations on Safety Management of Hazardous Chemicals
>Identification of Major Hazard Installations for Hazardous Chemicals (GB 18218)
>No. / Code Chemical name / Category Threshold quantity
>J5 Acute toxic 500 t
>W5.4 Flammable liquids 5,000 t
>Hazardous Chemicals for Priority Management
Listed under SAWS
>Catalogue of Specially Controlled Hazardous
Listed Chemicals
>List of Explosive Precursors
Not listed
>Regulations on Occupational Labor Protection in the at workplaces where
>Toxic Substances Are Used
>Catalogue of Highly Toxic Chemicals
Listed
>Regulation of Environmental Management on the First Import of Chemicals and the Import and Export of Toxic Chemicals
>China Severely Restricted Toxic Chemicals for Import and Export
>Regulation on the Administration of Precursor Chemicals
>Catalogue and Classification of Precursor Chemicals
>Regulations on the Administration of Controlled Chemicals
>List of Controlled Chemicals
>Regulations of Ozone Depleting Substances Management
>List of Controlled Ozone Depleting Substances
>List of Controlled Ozone Depleting Substances Import and Export
>Environmental Protection Law
>List of Priority Controlled Chemicals
>List of Key Controlled New Pollutants
Not listed
SECTION 16: Other information
>Full text of other abbreviations
ACGIH
USA. ACGIH Threshold Limit Values (TLV)
ACGIH BEI
ACGIH - Biological Exposure Indices (BEI)
GBZ 2.1-2007
Occupational exposure limits for hazardous agents in the workplace - Chemical hazardous agents.
ACGIH / TWA
8-hour, time-weighted average
ACGIH / STEL
Short-term exposure limit
GBZ 2.1-2007 / PC-TWA
Permissible concentration - time weighted average
GBZ 2.1-2007 / PC-STEL
Permissible concentration - short term exposure limit
GBZ 2.1-2007 / MAC AIIC - Australian Invent Transport by Land of Bra bw - Body weight; CMR Standard of the German List (Canada); ECx - Conc associated with x% respo Chemical Substances (Jap response; ERG - Emerge GLP - Good Laboratory P cer; IATA - International Construction and Equipm Half maximal inhibitory c tion; IECSC - Inventory o tional Maritime Dangerou Industrial Safety and H Standardization; KECI - K tration to 50 % of a test (Median Lethal Dose); MA lution from Ships; n.o.s. No Observed (Adverse) E fect Level; NOELR - No Norm; NTP - National Toxi icals; OECD - Organizatio fice of Chemical Safety a and Toxic substance; PIC stances; (Q)SAR - (Quant (EC) No 1907/2006 of th Registration, Evaluation, Accelerating Decompositi Chemical Substance Inve Thailand Existing Chemica States); UN - United Nat Transport of Dangerous WHMIS - Workplace Hazar
Maximum allowable concentration ry of Industrial Chemicals
ANTT - National Agency for il
ASTM - American Society for the Testing of Materials
- Carcinogen, Mutagen or Reproductive Toxicant
DIN nstitute for Standardisation
DSL - Domestic Substances ntration associated with x% response
ELx - Loading rate se
EmS - Emergency Schedule
ENCS - Existing and New n)
ErCx - Concentration associated with x% growth rate cy Response Guide
GHS - Globally Harmonized System
actice
IARC - International Agency for Research on Canir Transport Association
IBC - International Code for the nt of Ships carrying Dangerous Chemicals in Bulk
IC50 ncentration
ICAO - International Civil Aviation Organiza- Existing Chemical Substances in China
IMDG - Interna- Goods
IMO - International Maritime Organization
ISHL alth Law (Japan)
ISO - International Organisation for rea Existing Chemicals Inventory
LC50 - Lethal Concenopulation
LD50 - Lethal Dose to 50% of a test population POL - International Convention for the Prevention of Pol- Not Otherwise Specified
Nch - Chilean Norm
NO(A)EC fect Concentration
NO(A)EL - No Observed (Adverse) Efbservable Effect Loading Rate
NOM - Official Mexican ology Program
NZIoC - New Zealand Inventory of Chemfor Economic Co-operation and Development
OPPTS - Ofd Pollution Prevention
PBT - Persistent, Bioaccumulative S - Philippines Inventory of Chemicals and Chemical Subtative) Structure Activity Relationship
REACH - Regulation European Parliament and of the Council concerning the uthorisation and Restriction of Chemicals
SADT - Selfn Temperature
SDS - Safety Data Sheet
TCSI - Taiwan tory
TDG - Transportation of Dangerous Goods
TECI s Inventory
TSCA - Toxic Substances Control Act (United ons
UNRTDG - United Nations Recommendations on the oods
vPvB - Very Persistent and Very Bioaccumulative
ous Materials Information System
ANTT - National Agency for il
ASTM - American Society for the Testing of Materials
- Carcinogen, Mutagen or Reproductive Toxicant
DIN nstitute for Standardisation
DSL - Domestic Substances ntration associated with x% response
ELx - Loading rate se
EmS - Emergency Schedule
ENCS - Existing and New n)
ErCx - Concentration associated with x% growth rate cy Response Guide
GHS - Globally Harmonized System
actice
IARC - International Agency for Research on Canir Transport Association
IBC - International Code for the nt of Ships carrying Dangerous Chemicals in Bulk
IC50 ncentration
ICAO - International Civil Aviation Organiza- Existing Chemical Substances in China
IMDG - Interna- Goods
IMO - International Maritime Organization
ISHL alth Law (Japan)
ISO - International Organisation for rea Existing Chemicals Inventory
LC50 - Lethal Concenopulation
LD50 - Lethal Dose to 50% of a test population POL - International Convention for the Prevention of Pol- Not Otherwise Specified
Nch - Chilean Norm
NO(A)EC fect Concentration
NO(A)EL - No Observed (Adverse) Efbservable Effect Loading Rate
NOM - Official Mexican ology Program
NZIoC - New Zealand Inventory of Chemfor Economic Co-operation and Development
OPPTS - Ofd Pollution Prevention
PBT - Persistent, Bioaccumulative S - Philippines Inventory of Chemicals and Chemical Subtative) Structure Activity Relationship
REACH - Regulation European Parliament and of the Council concerning the uthorisation and Restriction of Chemicals
SADT - Selfn Temperature
SDS - Safety Data Sheet
TCSI - Taiwan tory
TDG - Transportation of Dangerous Goods
TECI s Inventory
TSCA - Toxic Substances Control Act (United ons
UNRTDG - United Nations Recommendations on the oods
vPvB - Very Persistent and Very Bioaccumulative
ous Materials Information System
本页为本站内置的 SDS 本地副本，可在线浏览；如需 PDF 文档，请点击右上角“下载 PDF”按钮。